Wonderscreen Tinted SPF 30 sunscreen lotion

Quick Summary:

Date Tested: 6/26/2023

In this Wonderscreen Tinted SPF 30 sunscreen lotion review, I test another tinted mineral based sunscreen which happens to perform very well!

The formulation of this specific sunscreen is a mineral based (inorganic) lotion which incorporates 19% Zinc Oxide. It isn’t the highest I have ever seen (by %) but it provides strikingly good protection, despite the runny viscosity. I was actually pretty surprised by the positive testing results, which shows that you cant just judge a book by its cover in the world of sunscreen.

Testing the Wonderscreen Tinted SPF 30 showed that the formulation cut UVA by 95.73%, blocked UVB by 91.35%, and reduced total UVI by 95.48%. For a mineral sunscreen using only 19% ZO content by percentage, this lotion performed quite well.

Wonderscreen Tinted SPF 30 sunscreen lotion ingredients


Active ingredients: Zinc Oxide 19.0%

Inactive Ingredients: Water, Ethylhexyl Olivate, Dimethicone, C9-12 Alkane, Cocoglycerides, Hydroxyethyl Dimethicone Laurate,Pentylene Glycol, Butyloctyl Salicylate, Glycerin, Jojoba Esters, Pyrus Malus (Apple) Fruit Extract, Polymethylsilsesquioxane, Squalane, Dipotassium Glycyrrhizate,Beta Vulgaris (Beet) Root Extract, Fructooligosaccharides, Glycine Soja (Soybean) Seed Extract Diheptyl Succinate, Disteardimonium Hectorite, Phenoxyethanol, Sodium Chloride, Polyhydroxystearic Acid, Trihydroxystearin, Triethyl Citrate, Hydroxyacetophenone, Sodium Citrate, Tetrasodium Glutamate Diacetate, Sodium Dehydroacetate, Capryloyl Glycerin/Sebacic Acid Copolymer.

Manufacturers Website: www.dimebeautyco.com

Wonderscreen Tinted SPF30 lotion characteristics at a glance:

  • Non-whitening
  • Non-drying
  • Broad-spectrum
  • Lightweight
  • Non-greasy
  • Viscosity is runny

Prepared slide ready for testing

The Wonderscreen Tinted SPF30 has a runny/thin viscosity but decent distribution of the physical UV blockers despite appearing otherwise on the prepared slide sample.

You can see where the magnetic vice pressure area (in the center of the slide) has left a thin layer of the sunscreen which didn’t bode well for testing. However, looks can be deceiving and the test results speak for themselves.

Below are the results from 2 hours of testing in my UV testing station.


Wonderscreen Tinted SPF 30 UV blocking test results

Sunscreen Testing Results. The blocking ability for UVA, UVB, and UVI are shown above as percentages.

Ultraviolet light quick reference:

UVA: The Ultraviolet wavelength from 315nm – 400nm. The “Aging UV light” – Causes wrinkles.
UVB: The Ultraviolet wavelength from 280nm – 315nm. The “Bad UV light” – Causes skin cancer.
UVI: The global sun UV index. The more a sunscreen can reduce the level of UVI, the better.


UV test results:

Ultraviolet sensor readings:

Before Sunscreen After Sunscreen % UV Blocked
TEMP 78.95 78.7
UVA 25413.5 1085 95.73%
UVB 1300.5 112.5 91.35%
UVI 14.93 .68 95.48%

Want to know more about how I test sunscreen? Head here to read about the details.

Testing notes:

While not available on Amazon and a relatively unknown (to me) company, I found this product to test quite well. Being that the formulation is a bit runny, it probably feels pretty good on application to the skin. It is tinted, so that may be a draw for some. Overall I do recommend this product due to the decent performance.

Want to try the Wonderscreen Tinted SPF 30 sunscreen lotion?

Rating: 5 out of 5.

Recommend, but might be difficult to obtain online.


Disclosure: the Amazon link shown is the only affiliate link I am sharing on this post. I will earn a commission if you click on the amazon listed product link and place an order (at no cost to you). I do not collect any personally identifying information. Every little bit helps to keep this site up and running, I do appreciate it!

Leave a Reply

Your email address will not be published. Required fields are marked *